Check valves
Swing check valve (wafer)
Single-disc swing check valve in stainless steel, wafer format for mounting between flanges from DN 50 to DN 500. Rapid closure and minimal head loss for clean or lightly loaded water rising mains.
- 12references
- 50 – 500 mmsize range
- 8in stock
The swing check valve is the most compact and lightweight solution for preventing fluid return in rising mains and distribution networks. Its single disc, hinged on a stainless steel shaft, opens at minimal flow and closes by gravity and back-pressure, preventing water hammer.
The wafer format allows it to be installed between two standard PN 10/16 flanges taking up hardly any space, and the stainless steel disc guarantees a long service life in clean or lightly loaded water, both in pumping systems and in irrigation networks.
Available from DN 50 to DN 500, it complements the Grupo Almagromur ball and dual-plate check valves to cover any installation requirement.
- Type
- single-disc swing check valve, wafer mounting between flanges.
- Disc and shaft
- stainless steel.
- Working pressure
- PN 10/16.
- Automatic closure by gravity and back-pressure.
- Minimal head loss and low installation height.
- DN 50 · DN 65 · DN 80 · DN 100 · DN 125 · DN 150 · DN 200 · DN 250 · DN 300 · DN 350 · DN 400 · DN 500
- Pumping rising mains in irrigation and water supply.
- Pump protection against fluid return.
- Distribution networks and filtration manifolds.
- Industrial installations with clean or lightly loaded water.
References
Swing check valve
Subfamily created from ERP code GA224 (12 references). No PDF data sheet or dedicated photograph.
DN
| Reference | Product | Size | Availability | Actions |
|---|---|---|---|---|
| VR891022 | Stainless steel swing check valve DN 50 | DN 50 | In stock | |
| VR891023 | Stainless steel swing check valve DN 65 | DN 65 | In stock | |
| VR891024 | Stainless steel swing check valve DN 80 | DN 80 | Made to order | |
| VR891025 | Stainless steel swing check valve DN 100 | DN 100 | Last units | |
| VR891026 | Stainless steel swing check valve DN 125 | DN 125 | In stock | |
| VR891027 | Stainless steel swing check valve DN 150 | DN 150 | In stock | |
| VR891028 | Stainless steel swing check valve DN 200 | DN 200 | In stock | |
| VR891029 | Stainless steel swing check valve DN 250 | DN 250 | Made to order | |
| VR891030 | Stainless steel swing check valve DN 300 | DN 300 | In stock | |
| VR891031 | Stainless steel swing check valve DN 350 | DN 350 | Made to order | |
| VR891032 | Stainless steel swing check valve DN 400 | DN 400 | Last units | |
| VR891033 | Stainless steel swing check valve DN 500 | DN 500 | Made to order |
No references match the filters.
From the blog: guides on this family
More news
23 June 2026Water hammer in irrigation networks: how to prevent it with check valves and rubber expansion jointsEvery pump stop is a hammer blow on the pipeline. Which check valve stops the water column best, where the rubber expansion joint goes and which design mistakes we see most often in control heads.
12 May 2026Digitalisation of irrigation communities: which hydraulic parts a remote-controlled control head needsThe PERTE for digitalisation of the water cycle has funded hundreds of remote-control projects in irrigated areas. Sensors and solenoid valves are the visible part; underneath, you need hydraulics that do not fail.
9 December 2025Dismantling joints: what they are for and how to size them in a valve chamberIt is the part nobody sees until a valve has to be replaced. What a dismantling joint is, where it goes, how the length is chosen and why we manufacture it in stainless steel.
Other check valves families
View the category
GA18-1Flanged ball check valveBall check valve, of robust ductile iron design. Its floating ball mechanism is self-cleaning and does not jam, offering a full bore with no head l…
GA18-3Dual-plate wafer check valveWafer-type check valve, of compact, lightweight design for installation between flanges. Its dual-plate mechanism with stainless steel springs ensu…
GA18-4Dual-plate check valve PN25High-performance dual-plate check valve, designed for high-pressure systems (PN25). Its GGG-40 ductile iron body and high-quality stainless steel i…