Restrained fittings
Anti-pull-out coupling for PVC/PE pipes
Anti-pull-out mechanical coupling made of ductile iron for PVC and polyethylene (PE) pipes. Its locking system with a toothed brass ring ensures a fully secure connection, eliminating the need for thrust blocks. Ideal for fast, reliable joints in water networks.
- 16references
- 50 – 500 mmsize range
- 16in stock
The GA01-2 anti-pull-out coupling is an advanced engineered solution designed to simplify and secure joints on PVC and high-density polyethylene (HDPE) pipes. Its main innovation lies in the internal locking system, consisting of a toothed brass ring that grips the pipe surface firmly, preventing any movement or disconnection caused by the internal pressure of the network or by ground movement.
This feature eliminates the need to build costly, time-consuming concrete thrust blocks at changes of direction and critical points in the network, resulting in significant savings in installation time and civil works costs.
The coupling body is made of GGG-50 ductile iron, providing exceptional robustness and corrosion resistance, further protected by a high-quality epoxy coating. Watertightness is guaranteed by an EPDM gasket, and tightening security is entrusted to high-strength bolts with Dacromet treatment, which offers superior corrosion protection compared with standard zinc plating. It is the perfect choice for installers and site managers seeking maximum safety and efficiency.
- Body and flange
- GGG-50 ductile iron.
- Locking system
- Toothed brass ring.
- Sealing gasket
- EPDM rubber, suitable for drinking water.
- Bolts (nuts and washers)
- Grade 8.8 steel with special Dacromet coating for extreme corrosion resistance.
- Nominal pressure (PN)
- 16 bar.
- Compatible pipes
- PVC and high-density polyethylene (HDPE).
- Coating
- High-adhesion epoxy paint, suitable for contact with drinking water.
- Key advantage
- Eliminates the need to build concrete thrust blocks.
- For pipe Ø50/63mm2 M12 bolts
- For pipe Ø75/90mm4 M12 bolts
- For pipe Ø110mm4 M12 bolts
- For pipe Ø125/140mm4 M12 bolts
- For pipe Ø150/160mm4 M12 bolts
- For pipe Ø200mm4 M12 bolts
- For pipe Ø250mm6 M16 bolts
- For pipe Ø300/315mm6 M12 bolts
Full dimensions and weights in the Technical data sheet (PDF).
- Water supply networksSecure joints in drinking water distribution networks.
- Pumping stations and treatment plantsConnection of equipment and pipes, withstanding the vibrations and pressures of pump start-ups.
- Irrigation installationsReliable joints on the main lines of large-scale irrigation systems.
- Civil worksIdeal for unstable ground or areas at risk of movement, where restraint is critical.
- Connections in confined spacesPerfect for locations where excavating to build thrust blocks is difficult or impossible.
References
Anti-pull-out coupling for PVC/PE
DN
| Reference | Product | Size | Availability | Actions |
|---|---|---|---|---|
| UA000050 | Restrained coupling for PVC/PE Ø50 | DN 50 | In stock | |
| UA000063 | Restrained coupling for PVC/PE Ø63 | DN 63 | In stock | |
| UA000075 | Restrained coupling for PVC/PE Ø75 | DN 75 | In stock | |
| UA000090 | Restrained coupling for PVC/PE Ø90 | DN 90 | In stock | |
| UA000110 | Restrained coupling for PVC/PE Ø110 | DN 110 | In stock | |
| UA000125 | Restrained coupling for PVC/PE Ø125 | DN 125 | In stock | |
| UA000140 | Restrained coupling for PVC/PE Ø140 | DN 140 | In stock | |
| UA000160 | Restrained coupling for PVC/PE Ø160 | DN 160 | In stock | |
| UA000180 | Restrained coupling for PVC/PE Ø180 | DN 180 | In stock | |
| UA000200 | Restrained coupling for PVC/PE Ø200 | Ø200 | In stock | |
| UA000225 | Restrained coupling for PVC/PE Ø225 | DN 225 | In stock | |
| UA000250 | Restrained coupling for PVC/PE Ø250 | DN 250 | In stock | |
| UA000315 | Restrained coupling for PVC/PE Ø315 | DN 315 | In stock | |
| UA000355 | Restrained coupling for PVC/PE Ø355 | Ø355 | In stock | |
| UA000400 | Restrained coupling for PVC/PE Ø400 | Ø400 | In stock | |
| UA000500 | Restrained coupling for PVC/PE Ø500 | Ø500 | Last units |
No references match the filters.
From the blog: guides on this family
More news
19 August 2026How to repair a leak in a buried PVC pipe without stopping irrigationAnti-pull repair collar or stainless steel repair clamp: which to use depending on the type of break, how it is fitted in the trench and why the repair withstands the pressure of the irrigation season.
28 April 2026How to connect an asbestos cement pipe to PVC or HDPE without replacing the whole networkThousands of kilometres of asbestos cement pipe are still in service. When you have to join it to new pipe, the right part depends on the outside diameters and on whether there is a risk of pull-out: Gibault joint, wide-range coupling or self-anchoring transition coupling.
10 March 2026Universal, wide-range or anti-pull flange adaptor: which to choose to connect pipe to a valveAll three go from plain pipe to flange, but they solve different problems: diameter tolerance, transition between materials or axial restraint. A short guide so you do not order the wrong part.
Other restrained fittings families
View the category
GA01-1Anti-pull-out repair clampSelf-restrained repair clamp made of GGG-40 ductile iron for a fast, permanent pipe repair. Designed with an EPDM gasket for complete watertightnes…
GA01-3Anti-pull-out double-chamber flange adaptorSelf-restrained double-chamber flange adaptor for a secure connection between PVC/PE pipes and flanged components (valves, pumps, etc.). Made of GG…
GA01-4Anti-pull-out flange adaptor for PVC/PEFlange adaptor with anti-pull-out system for a direct, secure connection of PVC and polyethylene (PE) pipes to flanged components. Made of GGG-50 d…
GA01-5Self-restrained universal transition couplingThe definitive universal, self-restrained coupling. Connects and locks pipes of different materials and diameters in a single step. Made of ductile…
GA01-6Double-chamber flange adaptor for PVCDirect-insertion flange adaptor for PVC pipes. Made of GGG-50 ductile iron with a 250-micron epoxy coating, it offers a robust, watertight connecti…