Representative image of family GA18-3
Dual-plate wafer check valve
Dual-plate wafer check valve DN 100 PN 10/16
Ref. VR891003DN 100PN 10/16In stock
Wafer-type check valve, of compact, lightweight design for installation between flanges. Its dual-plate mechanism with stainless steel springs ensures rapid closure that minimises water hammer. Ideal for pumping and HVAC systems.
- Nominal diameter
- DN 100
- Nominal pressure
- PN 10/16
- Family
- GA18-3 · Dual-plate wafer check valve
- ERP description
- V.RET.T.CHECK DN 100 DOBLE DISCO INOX.PN10/16
- Design: Wafer type, for compact, lightweight assembly between flanges.
- Mechanism: Dual plate with return springs.
- Key advantage: Rapid closure with low water hammer.
- Internal components: Plates, shafts and springs manufactured in AISI-304 stainless steel.
- Body: EN-GJL-250 grey cast iron.
- Assembly: For installation between UNE-EN 1092-2 flanges (PN10/16).
- Installation: Suitable for horizontal or vertical position (with upward flow).
Other dual-plate wafer check valve sizes
All references- VR891000Dual-plate wafer check valve DN 50 PN 10/16In stock
- VR891001Dual-plate wafer check valve DN 65 PN 10/16In stock
- VR891002Dual-plate wafer check valve DN 80 PN 10/16In stock
- VR891004Dual-plate wafer check valve DN 125 PN 10/16In stock
- VR891005Dual-plate wafer check valve DN 150 PN 10/16In stock
- VR891006Dual-plate wafer check valve DN 200 PN 10/16In stock
From the blog: guides on this family
More news
23 June 2026Water hammer in irrigation networks: how to prevent it with check valves and rubber expansion jointsEvery pump stop is a hammer blow on the pipeline. Which check valve stops the water column best, where the rubber expansion joint goes and which design mistakes we see most often in control heads.
12 May 2026Digitalisation of irrigation communities: which hydraulic parts a remote-controlled control head needsThe PERTE for digitalisation of the water cycle has funded hundreds of remote-control projects in irrigated areas. Sensors and solenoid valves are the visible part; underneath, you need hydraulics that do not fail.
9 December 2025Dismantling joints: what they are for and how to size them in a valve chamberIt is the part nobody sees until a valve has to be replaced. What a dismantling joint is, where it goes, how the length is chosen and why we manufacture it in stainless steel.
