Representative image of family GA02-3
Mechanical-joint fittings
Mechanical-joint socket sleeve DN 350
Ref. ATM000350DN 350Made to order
Ductile iron elbows, tees, reducers and sleeves with mechanical joint (MJ socket) connection for cast iron pipe. A dismountable, watertight connection able to absorb small angular deflections in water supply networks and civil works.
- Nominal diameter
- DN 350
- Family
- GA02-3 · Mechanical-joint fittings
- ERP description
- MANGUITO ENCHUFE J.MECANICA DN 350
- Material: ductile iron.
- Joint type: socket with mechanical joint (gland + elastomer gasket + bolts).
- Coating: epoxy paint inside and out.
- Available items: 11° and 22° elbows, all-socket tees, tees with flanged branch, reducers and sleeves.
- Compatible pipe: ductile iron and grey cast iron.
- Working pressure: PN 10/16 (enquire by diameter).
Other mechanical-joint fittings sizes
All references- ATFEB300200Mechanical-joint socket tee DN 300 with flanged outlet DN 200Last units
- ATFEB300300Mechanical-joint socket tee DN 300 with flanged outlet DN 300Last units
- ATFEB300080Mechanical-joint socket tee DN 300 with flanged outlet DN 80Last units
- ATFEB350100Mechanical-joint socket tee DN 350 with flanged outlet DN 100Last units
- ATM000400Mechanical-joint socket sleeve DN 400Made to order
- ATFEB400200Mechanical-joint socket tee DN 400 with flanged outlet DN 200Made to order
From the blog: guides on this family
More news
12 May 2026Digitalisation of irrigation communities: which hydraulic parts a remote-controlled control head needsThe PERTE for digitalisation of the water cycle has funded hundreds of remote-control projects in irrigated areas. Sensors and solenoid valves are the visible part; underneath, you need hydraulics that do not fail.
21 January 2026Reclaimed and desalinated water in irrigation: what it demands of valves and fittingsSpain reuses more water than any other European country, and the south-east irrigates more and more with desalinated water. These are different waters: more salts, more chlorine, more aggressive to metal. This is how we manufacture for them.
9 December 2025Dismantling joints: what they are for and how to size them in a valve chamberIt is the part nobody sees until a valve has to be replaced. What a dismantling joint is, where it goes, how the length is chosen and why we manufacture it in stainless steel.
