Dismantling joints
Full-bore, high-flexibility dismantling joint
High-performance dismantling joint, made of GGG-50 ductile iron. Its full-bore design avoids turbulence and its ability to absorb axial and angular movement gives it great flexibility in the installation and maintenance of equipment.
- 29references
- 50 – 1000 mmsize range
- 21in stock
The GA06-1 dismantling joint is a superior piece of engineering, designed not only to make it easier to install and remove equipment, but also to improve the performance and durability of the whole network. Its main function is to provide telescopic length adjustment that simplifies the assembly of valves, pumps and meters.
This model stands out for two advanced features. Firstly, it has a full-bore design, meaning its inside diameter is equal to that of the pipe, eliminating obstructions, avoiding turbulence in the fluid and guaranteeing the accuracy of nearby measuring equipment such as flow meters.
Secondly, its construction allows slight axial and angular movement of the pipe to be absorbed, reducing stress on joints and equipment, a crucial advantage in installations subject to vibration or minor ground settlement. Made of robust GGG-50 ductile iron, it is the most complete, technically advanced solution for pump rooms and valve chambers.
- Material
- GGG-50 ductile iron body and flanges.
- Sealing gaskets
- EPDM O-rings for a secure seal.
- Internal design
- Full bore for undisturbed flow.
- Flexibility
- Allows axial and angular movement.
- Bolts
- High-strength steel tie rods.
- Coating
- Protective epoxy paint against corrosion.
- Nominal pressure
- PN10 / PN16.
- Flange standard
- Drilled to UNE-EN 1092-2.
- DN 50Adjustment range 190 - 270 mm - Weight: 13 kg
- DN 65Adjustment range 190 - 270 mm - Weight: 16 kg
- DN 80Adjustment range 190 - 270 mm - Weight: 19 kg
- DN 100Adjustment range 190 - 270 mm - Weight: 26 kg
- DN 125Adjustment range 190 - 270 mm - Weight: 32 kg
- DN 150Adjustment range 190 - 270 mm - Weight: 37 kg
- DN 200Adjustment range 190 - 270 mm - Weight: 53 kg
- DN 250Adjustment range 190 - 270 mm - Weight: 72 kg
- DN 300Adjustment range 190 - 270 mm - Weight: 81 kg
- DN 350Adjustment range 210 - 290 mm - Weight: 109 kg
- DN 400Adjustment range 210 - 290 mm - Weight: 150 kg
- DN 450Adjustment range 200 - 300 mm - Weight: 180 kg
- DN 500Adjustment range 250 - 350 mm - Weight: 206 kg
- DN 600Adjustment range 300 - 400 mm - Weight: 265 kg
Full dimensions and weights in the Technical data sheet (PDF).
- Flow meter installationIts full-bore design makes it perfect for installation next to meters, as it does not affect the reading.
- Pump rooms with vibrationIts ability to absorb angular movement protects both the pump and the pipe.
- Valve chambersMakes maintenance of all types of valves easier, allowing effortless removal.
- Joints on bridges or elevated crossingsWhere small structural movements can be absorbed by the joint.
- Treatment and filtration plantsAn essential component for installing and maintaining the complex equipment in plants.
References
Dismantling joint
DN
PN
No references match the filters.
From the blog: guides on this family
More news
12 May 2026Digitalisation of irrigation communities: which hydraulic parts a remote-controlled control head needsThe PERTE for digitalisation of the water cycle has funded hundreds of remote-control projects in irrigated areas. Sensors and solenoid valves are the visible part; underneath, you need hydraulics that do not fail.
9 December 2025Dismantling joints: what they are for and how to size them in a valve chamberIt is the part nobody sees until a valve has to be replaced. What a dismantling joint is, where it goes, how the length is chosen and why we manufacture it in stainless steel.
21 January 2026Reclaimed and desalinated water in irrigation: what it demands of valves and fittingsSpain reuses more water than any other European country, and the south-east irrigates more and more with desalinated water. These are different waters: more salts, more chlorine, more aggressive to metal. This is how we manufacture for them.
