Flanges
Loose backing flange for PVC stub ends
Steel backing (loose) flange, designed specifically for use with a solvent-welded PVC stub end. Its free-rotating design allows instant bolt alignment, speeding up the installation of flanged joints on PVC pipes.
- 14references
- 50 – 400 mmsize range
- 13in stock
The GA05-6 loose flange is the standard professional component for creating flanged connection points on PVC pipes. It is used together with a PVC stub end, which is solvent-welded to the end of the pipe. The steel flange slides behind and presses against the stub end to form a secure, perfectly aligned joint.
The main advantage of this system is the enormous simplification of assembly. Because it can rotate freely on the pipe, the flange allows the bolt holes to be aligned with any valve or fitting in seconds, completely eliminating the alignment problems of fixed flanges.
Made of tough steel, this item is indispensable in water treatment installations, swimming pools, irrigation systems and industry, where PVC pipe is widely used and a reliable, easy-to-assemble connection to flanged equipment is required.
- Material
- High-strength carbon steel.
- Type
- Loose (backing) flange.
- Pipe system
- Designed exclusively for use with PVC pipes and solvent-welded PVC stub ends.
- Key advantage
- Its free-rotating design allows easy, fast, effortless bolt alignment.
- Flange standard
- Drilling compatible with PN10/16 (to EN 1092-1).
- Surface finish
- Bare steel (protective treatment recommended for corrosive environments).
- For PVC pipe DN 50Flange Ø 165 mm - 4 holes Ø18 mm - Weight: 1.63 kg
- For PVC pipe DN 65Flange Ø 185 mm - 4 holes Ø18 mm - Weight: 1.81 kg
- For PVC pipe DN 80Flange Ø 200 mm - 8 holes Ø18 mm - Weight: 1.88 kg
- For PVC pipe DN 100Flange Ø 220 mm - 8 holes Ø18 mm - Weight: 2.09 kg
- For PVC pipe DN 125Flange Ø 250 mm - 8 holes Ø18 mm - Weight: 2.80 kg
- For PVC pipe DN 150Flange Ø 285 mm - 8 holes Ø22 mm - Weight: 3.80 kg
- For PVC pipe DN 200Flange Ø 340 mm - 12 holes Ø22 mm - Weight: 5.30 kg
- For PVC pipe DN 250Flange Ø 395 mm - 12 holes Ø26 mm - Weight: 7.80 kg
Full dimensions and weights in the Technical data sheet (PDF).
- Water treatment and swimming pool installationsThe method of choice for connecting pumps, filters and equipment in PVC systems.
- PVC irrigation networksFor connecting master valves and filtration systems at irrigation headworks.
- Industry and laboratoriesFor conveying fluids where PVC pipe is used for its chemical resistance.
- HVAC systemsIn water lines for cooling towers and other equipment.
- Plumbing and buildingFor creating dismountable connection points on PVC downpipes and drainage networks.
References
Backing flange for PVC stub ends
Pipe Ø
PN
No references match the filters.
From the blog: guides on this family
More news
Other flanges families
View the category
GA05-1Threaded flange DIN 2527Threaded flange made of ST 37.2 carbon steel. Converts a male-threaded pipe connection into a standard flanged connection (DIN 2527 / EN 1092-1), e…
GA05-2Blind flange DIN 2527Blind flange made of ST 37.2 carbon steel for securely sealing line ends or flanged valves. Complies with the DIN 2527 (EN 1092-1) dimensional stan…
GA05-3Irrigation-type slip-on welding flangeCarbon steel slip-on welding flange, light-series irrigation type, PN 10 (DN 80 also in PN 16). The economical, widely used option for creating fla…
GA05-4Slip-on welding flange DIN 2576 / 2502Slip-on welding flange made of carbon steel. Designed to create a permanent, high-strength flanged joint on steel pipes. Complies with DIN 2576 (PN…
GA05-5Irrigation-type backing flange for HDPE stub endsIrrigation-type steel backing (loose) flange for polyethylene (HDPE) stub ends. Converts a welded PE pipe into a standard flanged connection, rotat…
GA05-7Polypropylene-coated flangeHigh-performance loose flange for PE stub ends. Its steel core is fully encapsulated in polypropylene (PP), offering complete corrosion protection.…