Polypropylene (PP) coated steel loose flange

Inner core

Carbon steel.

Coating

Full encapsulation in high-strength polypropylene (PP).

Type

Maximum-protection loose (backing) flange.

Use

Requires a PE stub end (not included) welded to the pipe.

Key advantage

Absolute corrosion resistance and easy bolt alignment.

Flange standard

Drilling compatible with PN10/16.

Compatible pipe

High-density polyethylene (HDPE, PE100, PE80).

• For PE pipe Ø63 mmFlange Ø 157 mm - 4 holes Ø18 mm
• For PE pipe Ø75 mmFlange Ø 177 mm - 4 holes Ø18 mm
• For PE pipe Ø90 mmFlange Ø 192 mm - 8 holes Ø18 mm
• For PE pipe Ø110 mmFlange Ø 215 mm - 8 holes Ø18 mm
• For PE pipe Ø125 mmFlange Ø 215 mm - 8 holes Ø18 mm
• For PE pipe Ø160 mmFlange Ø 278 mm - 8 holes Ø22 mm
• For PE pipe Ø180 mmFlange Ø 278 mm - 8 holes Ø22 mm
• For PE pipe Ø200 mmFlange Ø 334 mm - 12 holes Ø22 mm
• For PE pipe Ø225 mmFlange Ø 334 mm - 12 holes Ø22 mm

Full dimensions and weights in the Technical data sheet (PDF).

• Coastal and marine installationsIdeal for submarine outfalls, desalination plants and any application in contact with seawater.
• Buried networks in aggressive soilsThe perfect choice for soils with high salinity, acidity or contamination.
• Chemical industryFor conveying corrosive fluids where maximum protection of the metal is required.
• Long-life infrastructureFor projects with a design life of over 50 years, where maintenance must be minimal.
• Mining and landfillsFor conveying leachates and other chemically active fluids.